About
All Feedback (553)
azdelivery (14671)- Feedback left by buyer.
More than a year ago
Verified purchase
Reibungslose Kommunikation. Sehr angenehmer Geschäftspartner.
viptechnology_eu (543)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
ehenstar (29050)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
alice1101983 (570217)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
mingpower88 (1238)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
tudpsd_st (159438)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
Reviews (7)
14 May 2018
What it says on the tin
Not much to say, tested the cells and they do, indeed, have about the capacity they're sold as. This is to say, I can't think of anything to complain!
26 October 2016
Barely okay
0 of 1 found this helpful The display isn't attached to anything other than a single pin-header, so it's pretty easy to accidentally twist the pins if you happen to lift the kit by the display or if it gets caught on anything. Also, the accuracy of this kit is rather mediocre; it's good for checking quickly if the parts work, but for proper measurements a real DMM should be used. I upgraded the firmware, too, and that did not improve the accuracy.
22 August 2016
Merely okay
1 of 1 found this helpful Really poor viewing-angles, requires you to look at the display from quite specific angle for the image to look good. The resistive touchscreen-layer is quite loose, so you have to apply surprisingly much pressure for the display to register it. Also, on my display the resistive layer is mounted slightly counter-clockwise, meaning that the touchscreen can never be fully calibrated -- when the left side of the screen is more-or-less calibrated, the right side is wrong, and if you calibrate the right side the left side goes wrong. The layer isn't rotated much, but enough for it to be noticeable and to bother me a tad.
With the above in mind, I didn't really expect much better anyways; the display is cheap and it is still useful.