Contact

Shop by category

    About

    Location: AustraliaMember since: 09 May 2005
    Reviews (7)
    Chainsaw sprocket rim .325 7 tooth GENUINE OREGON 11892 Husqvarna Stihl +++
    29 June 2018
    Quality speeks for itself.
    This is a top-quality item, there is no need to say more.
    UA6013L Non-Auto Range Digital LCD Capacitor Capacitance Test Tester Meter IU
    15 June 2018
    Good design, poor quality control.
    The meter works well on the bench, however when it is hand-held, the hand pressure on the case causes the meter to become unstable and give erratic readings, consistent with there being a bad internal connection in the meter.
    Protex Brake Master Cylinder (JB6063)
    06 November 2020
    Quality Product - Does not fit Nissan N14 Pulsar 2L without modification.
    This item does not fit the 1992 N14 Nissan Pulsar as per the Protex Vehicle catalog recommendation without modification. The reservoir fluid level switch on this product has a two-pin socket to connect to the car wiring loom. The Nissan N14 requires a cable with plug attached to connect to the wiring loom. The distributor of the Product has advised that they cannot offer a cable to enable this master cylinder to fit an N14 Nissan Pulsar. The options are either to swap the old reservoir onto the new cylinder, or else remove the switch/cable assembly from the old reservoir and fit it to the new reservoir on the cylinder. This then makes the new cylinder compatible with the Nissan N14. First picture is reservoir fluid level switch socket as supplied on JB6063. Second picture is JB6063 modified to fit Nissan N14 2L by removing existing fluid level switch socket and replacing with switch/cable assembly from old fluid reservoir.

    About

    Use this space to tell other eBay members about yourself and what you’re passionate about. Give people more reasons to follow you!1/1000