- All
- New
- Pre-owned
5stars
58ratings4stars
1rating3stars
0rating2stars
0rating1star
0rating
49 reviews
Outstanding for what it was designed to do
This is a capacitor bank plain and simple. A capacitor acts as a battery. When there is a current break it will supply power for a limited time (depending on the amount of capacitance).
I have several of these in different locomotives. Luckily, all of them were placed in locomotives that have either the PNP Econami or Tsunami2 decoders in them (they have a built-in plug). I removed the current keeper from its package, plugged it in, done, and all the hesitation problems with the locomotives disappeared, that simple!!
If you want to put one of these in a locomotive that is not equipped with the necessary plug there is a small amount of additional work involved (instructions included), nothing difficult at all (as long as the decoder is a Tsunami!!). I say this because the instructions are specific to Tsunami decoders. I know for a fact that some decoder manufacturers give instructions on installing a current keeper on their boards (TCS comes immediately to mind but it may be their current keeper, sorry don't remember). If your board is not Tsunami RESEARCH FIRST!!Read full review
Verified purchase: Yes • Condition: new • Sold by: choochoopeter57
Fits where the original Current Keeper won't!
Great product to prevent power glitches on dirty track or through crossovers or switches. Smaller size fits inside locomotives that may not have room for the original Current Keeper. I installed this new CKII unit in an Athearn Genesis ES44DC in place of the cab interior which was a good tradeoff. This locomotive has the O.E. Tsunami2 decoder which came factory equipped with the proper receptacle allowing the Current Keeper to be a plug-and-play installation. Read full review
Verified purchase: Yes • Condition: new • Sold by: r.m.bowditch
CurrentKeeper
It is easy to install, comes with diagrams for different decoders.
Works well, would recommend for anyone who has trouble with there Locomotive
making across turnouts or has dirty track in spots.Read full review
Verified purchase: Yes • Condition: new • Sold by: yankeedabbler
Great product that makes almost any track DCC friendly.
The Currentkeeper makes up for minor problems that make especially older tracks very DCC unfriendly. An older loco on my layout that would stop or hesitate on places that might have a break in the current now runs great thanks to the Currentkeeper and its array of capacitors. Great product.Read full review
Verified purchase: Yes • Condition: new • Sold by: bigdiscounttrains1
Current Keeper is a must.
If you are into Soundtraxx decoders with sound and you want reliable, rock solid performance add this CurrentKeeper to your Econami or Tsunami. If you have dirty track, spotty power or isolated frogs add this device.Read full review
Verified purchase: Yes • Condition: new • Sold by: r.m.bowditch
A nice addition to realism
This is the larger of two choices from Soundtraxx. It is fitted with a mini plug to connect it to the decoder board without needing to solder it. Some track work and switches have a “dead” spot, and this feature keeps the locomotive rolling along without hesitation.Read full review
Verified purchase: Yes • Condition: new • Sold by: mountain_subdiv...
Digitrax very responsive
Since methods of hooking up a current keeper vary greatly due to the possible variety of locos and decoders this requires much support from the company. Emailing them proved very helpful as they respond very quickly. Current Keepers have proven to be a miracle when installed correctly in balky locos.Read full review
Verified purchase: Yes • Condition: new • Sold by: modeltrainmarket
keep alive actually worked!
the mating of the keep alive 810140 actually plugs right into the Tsunami 2... no trying to figure out where what wires to cut or anything else. just plug and play. I turned on my engine, turned off the power and it operated for about 15 seconds. Wow, what an improvement. thanks. Jerry WilsonRead full review
Verified purchase: Yes • Condition: new • Sold by: r.m.bowditch
Good product. Make sure you have good soldering skills if it's not an exact for your loco.
Exactly as advertised, and although not specifically for the brand of loco I was upgrading, I was able to find instructions online easily and the installation was done easily.
Verified purchase: Yes • Condition: new • Sold by: r.m.bowditch
Current Keeper
These are easy to install and maintain power for up to 10 seconds which is more than ample for dirty, defective track and points, but the best thing is you don't lose the decoder when you have a short break in power, she just keeps on going, no restart, loss of sound or flicker. I have all three brands of the Current, power, whatever you want to call them and recommend them especially when you run on other than your own layout.Read full review
Verified purchase: Yes • Condition: new • Sold by: r.m.bowditch