5stars
5ratings4stars
0rating3stars
1rating2stars
0rating1star
1rating
Would recommend100% agree
Good value100% agree
Good quality100% agree
3 reviews
Excellent product. Hardest part of installing the bellows & bumper is removal/disassembly of the strut assembly.
I didn't have a spring compressor so I screwed together several stainless steel screw type hose clamps (to make a long one ... approx 10-12 ins long ... made 3 of these extra length clamps) approx 120 deg apart using the 3 clamps (i.e. equally spaced around the coil diameter). These were inserted around the coils after I had jacked up the lower control arm. The vehicle weight allows the jack to compress the spring. Then install the 3 hose clamps. You only need to snug up the screw to take up the slack in the clamps (you're not compressing the spring any further with the clamps). Now you simply remove the strut and disassemble it (with the spring held in this compressed state) and install the new bumper and bellows. Then reassemble and install in vehicle. Once again use the jack (rolling floor jack preferably) on the lower control arm to compress the spring enough to relieve the load on the 3 clamps and unscrew them and remove. Now you lower the jack (and control arm) and ... voila! .... the job is finished.Read full review...
Verified purchase: Yes | Condition: new | Sold by: aimsautoparts
Struts below boot with bumper
KYB products good quality perfect fit .
Verified purchase: Yes | Condition: new | Sold by: unclesamdeal
good quality
good quality
Verified purchase: Yes | Condition: new | Sold by: unclesamdeal